SEMA 2019

Nissan goes all-in on power and performance with 4 tricked out SEMA vehicles

The Nissan Frontier Desert Runner is one of four custom vehicles the automaker is showing off at SEMA.

Photo courtesy of Nissan North America

With the prevalence of the Altima, Sentra, Versa, and Murano in the marketplace, it might take a second thought to see the Nissan community as a powerful presence in the aftermarket modifications world. Nissan's SEMA builds were created to put performance front and center in a way that involves none of the automaker's usual fuel economy talking points.

Here are the Nissan builds that can be found at the annual convention.

Nissan Global Time Attack TT 370Z

Photo courtesy of Nissan North America

Z1 Motorsports of Carrollton, Georgia built this 750-horsepower 370Z in conjunction with the Nissan Motorsports team.

Every aspect of the vehicle is designed to be functional and durable, as well as low weight. The team stripped and acid-dripped the 370Z unibody to start then added a full roll cage. The exterior got a custom carbon fiber aerodynamic package that includes a 3D front splitter, rear diffuser, and sideboards.

Its stock 3.7-liter V6 engine was prepped for competition adding Garrett GTX 3076 turbochargers, a new fuel management and electronics system, and a Z1 Motorsports race exhaust system. The engine is paired with a six-speed sequential transmission with a Tilton custom clutch and NISMO GT-R Pro 1.5 way differential to help direct power to the wheels.

The car's suspension and steering where completely custom-built for the competition using NISMO components. Then a custom Brembo brake system, NISMO radiatior, and oil, transmission, and differential cooling systems were added.

It rides on RAYS Volk ZE40 Diamond Dark Gunmetal 18 x 11-inch aluminum-alloy wheels and Yokohama Advan A052 315/30R18 high performance tires.

The driver sits on a OMP HRC-R Carbon Air FIA race seat.

This car will compete in the 2020 Time Attack racing season after its time on the SEMA show floor.

Nissan Frontier Desert Runner

Photo courtesy of Nissan North America

This Frontier Desert Runner took a turn at the edge of the dunes and never looked back. This model was crafted by the team at MA Motorsports in Glen Arm, Maryland working in conjunction with the Nissan Motorsports team. It is a Frontier in name only, with a body, powertrain, and equipment designed specifically for off road racing.

The truck's original 4.0-liter V6 engine has been replaced with a 5.6-liter V8 from a Nissan Titan. It isn't your standard Titan engine, however. This one has gotten a race-spec rebuild that added a Garrett GTX3584RS turbocharger, custom intercooler, Jim Wolf Technology camshafts, pistons and valves, and MA Motorsports custom turbo header and exhaust system. It now achieves over 600 horsepower and 700 pound-feet of torque. The engine is paired with a six-speed manual transmission with Jim Wolf Technology clutch and lightweight flywheel.

Its suspension now includes a BTF Fabrication long travel front suspension kit, King Racing Triple Bypass front shocks and coil-overs, rear King Racing Triple Bypass shocks and Giant Motorsports Link Killer rear leaf springs.

The truck runs on Fifteen52 TurboMac HD wheels and 37-inch BFGoodrich Baja T/A tires. Its shock hoops, engine cage and bed cage were fabricated by MA Motorsports.

On its body, the truck wears Fiberworx Pre Running fenders and fabricated new front and rear bumpers along with a custom spare tire carrier. There is off road lighting by Ridgid Industries and a Speed Designs body wrap.

The model's no-frills cockpit includes a MA Motorsports custom harness bar and Sparco harnesses. There are also Sparco racing seats and a steering wheel with quick release steering wheel adapter.

Nissan Kicks Street Sport

Photo courtesy of Nissan North America

Nissan has kicked the Kicks up a notch with this build, giving the model life with Kicks Color Studio touches and custom features by 360 Composites including an oversize front air dam, rear roof spoiler and side skirts.

MA Motorsports had their hands on this model too, adding fabricated wide fender flares that cover Volk Racing TE37V 17x8.5 +30 offset wheels mounted with Falken Azenis RT615K +245/45R17 tires.

A custom Kicks suspension was constructed using a combination of NISMO/Ohlins coil-over shock absorbers.

The powertrain in the Kicks found on dealer lots isn't known for its peppiness so MA Motorsports worked to give the Kicks some zest adding a custom turbocharger kit to the 1.6-liter four-cylinder power plant. It has a custom fabricated NISMO exhaust.

The Kicks' interior now has Sparco SPX carbon bucket seats and custom upholstery.

Speed Design added exterior graphics to the model.

2020 Nissan TITAN with Genuine Nissan Accessories

Photo courtesy of Nissan North America

Performance isn't always about power. The 2020 Nissan Titan is being shown off at SEMA following its debut at the State Fair of Texas in September. The version on the show floor is much different than the version at the premier, though with a wide range of Genuine Nissan Accessories, including:

  • All Season Floor Mats
  • Rear Bumper Step Assist
  • Sliding Bed Extender
  • Tie-Down Cleats
  • Assist handle (tailgate access)
  • Mud flaps – front and rear (PRO-4X)
  • Front and rear mud flaps (PRO-4X)
  • Sport bar with off-road lights and light covers
  • Illuminated kick plates
  • Door scuff protector
  • Rugged Step Boards
  • Marker lights for fenders and grille
  • 4-inch drop hitch ball mount, Class III
  • Hitch Ball Class III (2-inch coupler)

All the parts were custom fit to the vehicle and are available to be ordered when the truck arrives on dealer lots later this year.

Trending News

 
 

New full-size pickup truck

Toyota announces luxurious Tundra Capstone

The Capstone is a luxurious new trim for the 2022 Tundra.

Toyota

The Toyota Tundra got a much-needed overhaul for the 2022 model year, after well over a decade on sale unchanged. The new trucks are more powerful, more efficient, and much more tech-forward than than their predecessors. One area Toyota needed to improve was the Tundra's luxury factor, which has never been as strong as high-end trucks from the Americans. The enormous Japanese automaker just announced a new model that should help it catch up. The Tundra Capstone will hit dealers' lots in spring with premium finishes and features, inside and out.

2022 Toyota Tundra Capstone The Capstone features exclusive styling and luxury features. Toyota

Toyota notes that the Capstone truck is just as capable as its less posh counterparts. It comes standard with the Tundra's new I-Force Max hybrid powertrain that makes 437 horsepower and 583 pound-feet of torque. Paired with a ten-speed automatic transmission, the combined powertrain is good for a max towing capacity of 10,340 pounds. The hybrid system can provide greater power and torque during towing, but better efficiency when cruising around town.

2022 Toyota Tundra Capstone Acoustic glass is a first for the Tundra, and gives the Capstone a quiet cabin.Toyota

The Capstone's cabin is where the real magic happens. The truck invites passengers with a standard automatic running boards, and the perforated leather upholstery comes in and exclusive black/white combination. There are real open-pore dark American walnut wood accents throughout the cabin, and a panoramic moonroof comes standard. The Capstone is the only Tundra model to get acoustic glass on the front doors for a quieter cabin.

2022 Toyota Tundra Capstone The Capstone comes with upscale, unique interior finishes, including two-tone leather upholstery.Toyota

A 12.3-inch digital gauge cluster and 10-inch head-up display are standard. The gauge cluster can be configured to show various functions beyond speed and engine revs. A 14-inch touchscreen is standard that runs wireless Apple CarPlay and Android Auto. Toyota's infotainment systems haven't been the most responsive or easy to use, but the automaker's new interface is intuitive, responsive, and powerful. Over-the-air updates can improve functions and add new ones over time, and cloud-based apps update traffic and other information in real time.

Trending News

 
 

The first Hummer EVs are rolling off the line.

GMC

After a year filled with delays and production issues, General Motors has a great reason to celebrate. The first GMC Hummer EV Pickups are rolling off the production line and will be in buyers' driveways soon. The first, VIN 001, was purchased at a Barret-Jackson auction back in March for $2.5 million, but the rest were sold at the EV's asking price, which starts at $110,295.

The Hummer EV comes as Chevrolet announces that orders will open for the Silverado EV in early January, and as Ford readies the F-150 Lightning for production. It also lands just as Rivian is getting its R1T pickups out the door, so we've moved from zero electric pickups to several in the span of just a few months.

GMC HUMMER EV PICKUP | Customer Deliveries Start Now youtu.be

The GMC Hummer EV offers several enticing features that include a four-wheel "CrabWalk" function for diagonal movement around off-road obstacles, adaptive air suspension, a Watts to Freedom (WTF) mode that allows the hefty EV to scoot from 0-60 mph in just three seconds, and Super Cruise, GM's hands-free driving system.

GMC sold out of the Edition 1 Hummer, but reservations for other models are still open. The vehicle is being built at GM's Factory Zero facility in Detroit-Hammtramck, and will be joined by the Silverado EV when its production commences. The plant saw a $2.2 billion renovation to produce EVs and is key to GM's early electrified successes.

Trending News